Pedro's Fixed Torque Driver 6Nm (Green) - Preset Torque Tool with Bits

Pedro's Fixed Torque Driver 6Nm (Green) - Preset Torque Tool with Bits

Carbon frames and components can crush or crack if bolts are over-tightened. The Pedro's Fixed Torque Driver is preset to 6Nm with an infinite torque-limiting clutch: when that value is reached the clutch slips and clicks, and it will not allow the bolt to be over-torqued.

Each driver is calibrated on a torque analyser accurate to +/- 1% and tested five times before packing, with the results and date recorded on the product card. The handle is colour-coded by torque value and stores two spare bits.

Key Features

• Preset to 6Nm
• Infinite torque-limiting clutch prevents over-torquing
• Calibrated on an analyser accurate to +/- 1%, tested 5 times with results recorded on the product card
• Magnetic socket accepts standard 1/4in hex bits
• Ergonomic handle stores two extra bits
• Green colour-coded handle

Compatibility

• Any bolt specified at 6Nm
• Standard 1/4in hex-shank bits

In the Box

• 1 x 6Nm Fixed Torque Driver
• 4mm hex bit
• 5mm hex bit
• T25 Torx bit
• Calibration record card

Good to Know

• Also available preset to 4Nm, 5Nm and 6Nm (codes 6460630, 6460631, 6460632).

Care & Safety

Only use on fasteners whose specified torque is 6Nm; check the component manufacturer's torque marking or instructions first.